Ron@Optimum Posted December 7, 2018 Share Posted December 7, 2018 Tire Protection and Coating 8 oz 00812779025494 - $15.99 32 oz 00812779025500 - $49.99 Optimum Tire Protection & Coating is a long lasting water based tire shine and protectant. Applied to a clean surface it will give you an easy to clean, good looking tire for months. Accelerate into the future without sling, oils, or silicone. Easy to use. Long lasting. Environmentally friendly. Quote Link to comment Share on other sites More sharing options...
Setec Astronomy Posted December 7, 2018 Share Posted December 7, 2018 And setting the standard for pricing on tire coating, at half the competition. Quote Link to comment Share on other sites More sharing options...
Ron@Optimum Posted December 10, 2018 Author Share Posted December 10, 2018 further information on Tire Coating will be out this week. Quote Link to comment Share on other sites More sharing options...
toddj Posted December 11, 2018 Share Posted December 11, 2018 Just need a link to so can buy it !! Quote Link to comment Share on other sites More sharing options...
Ron@Optimum Posted December 11, 2018 Author Share Posted December 11, 2018 Available Friday (not listed yet) from: optimumcarcare.com opticoat.com Quote Link to comment Share on other sites More sharing options...
The Guz Posted December 15, 2018 Share Posted December 15, 2018 Available now http://opti-coat.net/opts/index.php?route=product/product&path=68&product_id=288 Quote Link to comment Share on other sites More sharing options...
Gordon Parr Posted December 16, 2018 Share Posted December 16, 2018 Order placed!!! Quote Link to comment Share on other sites More sharing options...
Ron@Optimum Posted December 16, 2018 Author Share Posted December 16, 2018 Further information on TPC: What is the prep: Spray straight Power Clean onto the tire and keep cleaning until there is NO BROWN left on the tire. This is incredibly important. We recommend the Optimum Air Foamer because it greatly increases dwell time and the effectiveness of Power Clean. We have also found that a stiff bristled brush works better than a soft brush such as the Wheel and Body brush by Optimum. You will then completely dry the tire until there is no moisture left on the surface. We recommend a combination of a towel and blow gun. How to apply: We have found the best results come from either applying with an HVLP gun (NOT the Optibond tire gun) or applying by hand with a medium pile microfiber towel (around 300 GSM) the tire should have a nice even purple color around the whole tire. A single application will give a satin/matte look. Waiting 30 minutes and applying a second coat will make the tire quite shiny. Optimum only recommends up to 3 coats at this time. Longevity: 6-12 months Quote Link to comment Share on other sites More sharing options...
Detail Mutant Posted December 16, 2018 Share Posted December 16, 2018 14 hours ago, Ron@Optimum said: Further information on TPC: What is the prep: Spray straight Power Clean onto the tire and keep cleaning until there is NO BROWN left on the tire. This is incredibly important. We recommend the Optimum Air Foamer because it greatly increases dwell time and the effectiveness of Power Clean. We have also found that a stiff bristled brush works better than a soft brush such as the Wheel and Body brush by Optimum. You will then completely dry the tire until there is no moisture left on the surface. We recommend a combination of a towel and blow gun. What is the required compressor specification for the Optimum Air Foamer? Optimum site just indicates set pressure between 60-90 PSI. No indication of required minimum CFM for these pressures. If the CFM requirements are too high (ie large compressor) then I would rather just stick with IK foamer. I just haven't tried Power Clean straight in the IK foamer yet. Highest dilution ratio used so far is 3:1. Is it critical to use Power Clean straight or would any dilution ratio work until no more brown is seen (just more likely to be single application with undiluted Power Clean)? Quote Link to comment Share on other sites More sharing options...
Setec Astronomy Posted December 17, 2018 Share Posted December 17, 2018 On 12/15/2018 at 11:34 PM, Ron@Optimum said: How to apply: ...applying by hand with a medium pile microfiber towel (around 300 GSM) Ron, just water cleanup on that towel, right after use? Quote Link to comment Share on other sites More sharing options...
Ron@Optimum Posted December 18, 2018 Author Share Posted December 18, 2018 Optimum Foamer should be at 60-90 psi. Immediately soak towels in Optimum Power Clean, dwell a minimum of 10 min, rinse then wash normally, do not allow to dry before washing. Quote Link to comment Share on other sites More sharing options...
toddj Posted December 19, 2018 Share Posted December 19, 2018 Any minimum temperature requirements for the application? Quote Link to comment Share on other sites More sharing options...
Ron@Optimum Posted December 19, 2018 Author Share Posted December 19, 2018 Minimum application temperature of 40 degrees and expect longer cure times at low temps. Quote Link to comment Share on other sites More sharing options...
Lowejackson Posted December 19, 2018 Share Posted December 19, 2018 2 hours ago, Ron@Optimum said: Minimum application temperature of 40 degrees and expect longer cure times at low temps. 40 Degrees! Wow. Oh, you mean Fahrenheit Quote Link to comment Share on other sites More sharing options...
Ron@Optimum Posted December 19, 2018 Author Share Posted December 19, 2018 still an American company, Lowe Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.