spyder Posted April 3, 2011 Share Posted April 3, 2011 Hi, can you tell me if I wipe a panel with tar remover will Opti coat 2 still remain ? Also does the surface bead water or sheet? Thanks, Michael Link to comment Share on other sites More sharing options...
SuperiorShine Posted April 4, 2011 Share Posted April 4, 2011 Opti Coat will bead water, i cant comment on the 2.0 but the pro version will not be affected by any sort of chemicals, i have tried removing it with degreasers, acid cleaners and solvents with no luck, it can only be removed by polishing or sanding. Someone else might be able to confirm this though? Link to comment Share on other sites More sharing options...
spyder Posted April 5, 2011 Author Share Posted April 5, 2011 Opti Coat will bead water, i cant comment on the 2.0 but the pro version will not be affected by any sort of chemicals, i have tried removing it with degreasers, acid cleaners and solvents with no luck, it can only be removed by polishing or sanding. Someone else might be able to confirm this though? Thanks for your reply.Sounds like a great product. Link to comment Share on other sites More sharing options...
CEE DOG Posted August 22, 2011 Share Posted August 22, 2011 Hi spyder, Welcome! 2.0 is also resistant to chemicals. I tested by pouring some extremely harsh chemicals (Pool acid, pool chlorine, mineral spirits, and tar remover on a test panel and it didn't remove the coating. Still sheeted and beaded. It must be polished/compunded if you want to remove it (like a coat of paint). Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.