CHALM Posted March 18, 2013 Share Posted March 18, 2013 Lately I've been using Opti Clean as a pre soak on side and lower panels when doing an ONR wash. I know that ONR can be used for this, and is more cost effective, but I like the added insurance when using the Opti Clean. I was thinking, why not get the best of both worlds.....cost effective and a bit more insurance? Can ONR and Opti Clean be mixed as a pre soak for an ONR wash? Thanks a bunch! Nate Link to comment Share on other sites More sharing options...
Rcrew Posted March 20, 2013 Share Posted March 20, 2013 I don't see why not. Some other options that might be more economical: consider decreasing the dilution rate on your ONR mix, or presoaking with power clean. Or switch to the ONR+W product. That will give you an edge in terms of dirt being less able to stick to your lower panels between washes. Link to comment Share on other sites More sharing options...
CHALM Posted March 20, 2013 Author Share Posted March 20, 2013 Cool. Thanks for the reply. Just curious to see if the two products will store well, once mixed. I usually do a 2 liter pump sprayer for my presoak. Link to comment Share on other sites More sharing options...
CHALM Posted March 22, 2013 Author Share Posted March 22, 2013 Thanks Chris! Oh...and thanks for the speedy shipping on the glass coating. Now just need the warm weather. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.