sydtoosic Posted July 17, 2013 Share Posted July 17, 2013 Should I clay first and then use a non abrasive polish to spruce up the existing coat? I don't want to remove any OC, I just want to spruce it up and give it a light cleaning. I have CG Blacklight and CG V38. Will any of these work? I also have BF finishing polish. Will a finishing polish do the job without removing the coating. I can use my PC or do it by hand. Any thoughts or advice would be greatly appreciated. Link to comment Share on other sites More sharing options...
sydtoosic Posted July 19, 2013 Author Share Posted July 19, 2013 A degreasing wash and a chemical paint cleaner by machine with a finishing pad is ideal. thanx Chris... which degreaser would you recommend and which chem paint cleaner? ok, disregard the first question... of course i would use OPC for the degreaser, but which paint cleaner? Link to comment Share on other sites More sharing options...
sydtoosic Posted July 22, 2013 Author Share Posted July 22, 2013 so i have the OPC, for the wash, can i use the OPS as the cleaner? Link to comment Share on other sites More sharing options...
sydtoosic Posted July 26, 2013 Author Share Posted July 26, 2013 Thanx Chris... Link to comment Share on other sites More sharing options...
fjd726 Posted February 23, 2014 Share Posted February 23, 2014 Can you use a D.A. for the polishing step or does it have to be by hand? Don't want to reapply OC. Link to comment Share on other sites More sharing options...
fjd726 Posted April 30, 2014 Share Posted April 30, 2014 So Poliseal does not contain abrasives? I read that it has some. Will it take off existing Opti coat? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.