roger3380 Posted April 21, 2014 Share Posted April 21, 2014 I washed my jet black BMW today and i got some very light scratches on my hood. I applied opti-coat 2.0 2 weeks ago, not touching the car for two weeks letting it harden, For some resin my hood scratches very easy. Can i do a light polish with m205 with a white pad the reapply the opti-coat 2.0 or do i need to remove all of it for the hood? ( or just leave it alone) I dont have any photos right now. my prep is 1) wash with CG Citrus Wash & Gloss Car Wash 1 oz to 1 gallon of water to help remove wax 2) cay paint plus iron x 3) polish m205 white pad 4) ipa wipe down 2 xs 15% 5) opti-coat 2.0 Link to comment Share on other sites More sharing options...
primo spaghetti Posted April 22, 2014 Share Posted April 22, 2014 did you scratch it while washing, or you didnt correct it fully when polishing? id wait longer than 2 weeks personally to wash with anything other than ONR. it sounds to me like your wash method may be the culprit. how did you wash the car? Link to comment Share on other sites More sharing options...
roger3380 Posted April 22, 2014 Author Share Posted April 22, 2014 I used a 2 bucket and i barely went over the surface with a microfiber wash mitt. I think i did it when i dried the hood off. I used a plush microfiber drying towel. Can i lightly polish it out and reapply or do i need to completely remove all the coating. Use ONR like a quick detail or a the water less method. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.