Metal Magic Posted February 27, 2013 Share Posted February 27, 2013 ok give it to me! i have a awesome rotary and use it alot and i have a cyclo but i feel like i need something in between because the cyclo doesnt seem aggressive enough so what are you thoughts and y? Link to comment Share on other sites More sharing options...
primo spaghetti Posted March 1, 2013 Share Posted March 1, 2013 well i havent used the rupes yet, but im ordering one...i had the PC to supplement my Makita rotary until i recently upgraded to the Flex. in all honesty i dont like my flex...im having a hard time adjusting to the forced "reverse" rotation.. Link to comment Share on other sites More sharing options...
Paul S Posted March 1, 2013 Share Posted March 1, 2013 I have had the chance to use a Rupes 15,21 and 75. These belong to a couple of friends that had me join them on a couple of corrections. I now need to rid myself of a couple of my present da's before purchasing a 21 for my own use. The machines were very smooth and quieter then a 3401 plus being easy to control.I'm a believer in the large stroke technology. Link to comment Share on other sites More sharing options...
CHALM Posted March 1, 2013 Share Posted March 1, 2013 I will most likely keep my 3401 to run 4" and 5.5" pads. I'll be getting the 21mm Rupes very soon. Link to comment Share on other sites More sharing options...
bryansbestwax Posted March 9, 2013 Share Posted March 9, 2013 I have been using the rules since November . Havent touched other polishers except my griots which I put a 3 inch bp for tight spots. sent using my thumbs, mispelling most words Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.