khuyn019 Posted November 20, 2016 Share Posted November 20, 2016 After opti-glass pro been applied on my rear mirror for 1 hour, my detailer accidentally cleaned the mirror with some glass cleaning chemical (i think it was diluted optimum no rinse wash but maybe he was using something stronger) and he also used strong pressure to clean off some streak on mirror. So my mirror is crystal clear right now but im not sure that the opti-glass pro still there because the guide i obtained said it needs at least 1 week to cure before touching chemicals? is there anyway i can check and do i have to come back to reapply it ? Thank you Link to comment Share on other sites More sharing options...
Ron@Optimum Posted November 28, 2016 Share Posted November 28, 2016 It depends on what was used to clean the glass, ONR was probably safe, but something stronger might have removed the Glass Pro. Spray water on the clean mirror and see if it beads - if it does your still protected. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.