hokiedood Posted May 12, 2020 Share Posted May 12, 2020 I've used OPC, Ferrex, and MDR to chemical decon my car but there's still fine grit on the surfaces. What are your thoughts on using a fine clay bar on Opti-Coat Pro+ coatings? Quote Link to comment Share on other sites More sharing options...
Ron@Optimum Posted May 12, 2020 Share Posted May 12, 2020 you can clay OCP+ but use a good lube (we recommend spray wax). I find a clay towel or mitt is more gentle than the bars. Quote Link to comment Share on other sites More sharing options...
hokiedood Posted May 14, 2020 Author Share Posted May 14, 2020 Would mild/medium clay bars like Meguiar's Professional Detailing Clay be too aggressive on OCP+? Quote Link to comment Share on other sites More sharing options...
Ron@Optimum Posted May 14, 2020 Share Posted May 14, 2020 shouldn't be, again use quality lube and don't press hard. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.