Robb Posted May 16, 2023 Share Posted May 16, 2023 My car was coated with Ceramic Pro 6 months ago. I want to use ONR to do a rinseless wash. Also, I want to flush off the loose dirt using a battery-powered pressure washer (which only produces about 400 psi and about 0.8 gallons per minute of flow). It also has a foam gun option. I plan to use deionized water to flush off the foam and also for the ONR solution to avoid mineral deposits. 1. Is ONR safe to use on Ceramic Pro? 2. Should I foam the car first before flushing? 3. What foaming product should I use that is safe for Ceramic Pro? 4. Should I use deionized water also for the foam? Quote Link to comment Share on other sites More sharing options...
Ron@Optimum Posted May 17, 2023 Share Posted May 17, 2023 Yes, ONR should be safe on Ceramic Pro. Be aware that ONR will not foam, but Opti-Coat M-Wash will and is formulated for ceramic coatings. I would foam first, then rinse. If possible it's always good to use DI water, but it's not necessary. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.