my04lincolnLS Posted July 4, 2008 Share Posted July 4, 2008 I did both cars today and they streaked real bad and left smudges on the paint. What could have caused this? Thanks Ryan Link to comment Share on other sites More sharing options...
Steve H Posted July 4, 2008 Share Posted July 4, 2008 I did both cars today and they streaked real bad and left smudges on the paint. What could have caused this? Thanks Ryan Ryan, Most often if you are experiencing streaking, you are using too much product. I recommend using less and see if that clears up your issues. One to two "spritzes" per panel usually is sufficient. Link to comment Share on other sites More sharing options...
my04lincolnLS Posted July 4, 2008 Author Share Posted July 4, 2008 See thats what I was thinking! I also thought it be the paste wax that was already on the cars. Who knows! Thanks for the reply! Link to comment Share on other sites More sharing options...
Steve H Posted July 4, 2008 Share Posted July 4, 2008 No problem. Hopefully you'll have better results the next time you use it. I constantly have to remind myself to back off when using OPT products. I tend to get a bit heavy handed with the gloss enhancer spray as well. Link to comment Share on other sites More sharing options...
Bence Posted July 4, 2008 Share Posted July 4, 2008 Ryan, did you shake the bottle? Link to comment Share on other sites More sharing options...
my04lincolnLS Posted July 4, 2008 Author Share Posted July 4, 2008 Ya! I shock the bottle real good. I guess there is a learning curve with this stuff. Thanks Ryan Link to comment Share on other sites More sharing options...
Bence Posted July 4, 2008 Share Posted July 4, 2008 Strange. It's likely an uncompatibility issue. Fairly unusual, but happens sometimes. What are the underlying layers? Link to comment Share on other sites More sharing options...
my04lincolnLS Posted July 5, 2008 Author Share Posted July 5, 2008 Pinnacle SSII. Link to comment Share on other sites More sharing options...
my04lincolnLS Posted July 5, 2008 Author Share Posted July 5, 2008 I was reading some post's on the site and come to the conclusion that I was probably using to much! Link to comment Share on other sites More sharing options...
Bunky Posted July 6, 2008 Share Posted July 6, 2008 I was reading some post's on the site and come to the conclusion that I was probably using to much! I sometimes think using a microfiber towel to spread a spray wax or detailing causes some streaking. A mf is too good at absorbing the product before spreading it until the towel is a little primed so what I see initially is certain sections get damp and others not depending on the spray pattern (finer works better). Link to comment Share on other sites More sharing options...
Bence Posted July 10, 2008 Share Posted July 10, 2008 Shake the product well, and spray the towel instead of the panel. This will give you an even coverage. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.