JayD Posted May 22, 2014 Share Posted May 22, 2014 Has anyone used OOC with good results as a clay or Nanoskin lubricant. If so, how did you dilute it? For regular use I mix it 3:1 like the bottle suggests, and it seems like that might be too slick as a clay-lube. Link to comment Share on other sites More sharing options...
Lowejackson Posted May 26, 2014 Share Posted May 26, 2014 I have not tried it but I am sure I have read about others using it. I would try it at 4:1 which is the dilution I found best for cleaning and then just experiment with different dilution rates to see what works for you. Link to comment Share on other sites More sharing options...
JayD Posted May 27, 2014 Author Share Posted May 27, 2014 Thanks Lowejackson for your reply. I just went ahead and used what I already had mixed up 3:1 and worked great. I should have just tried it in the first place. I will try mixing it 4:1 the next time I make some up. Link to comment Share on other sites More sharing options...
Lowejackson Posted May 27, 2014 Share Posted May 27, 2014 Glad it worked for you. The only reason I suggest using 4:1 is I find 3:1 gives me some streaking Link to comment Share on other sites More sharing options...
Lowejackson Posted June 2, 2014 Share Posted June 2, 2014 OCW for clay? Just spray and use the clay? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.