Flakey Posted October 1, 2013 Share Posted October 1, 2013 I am new to rotary polishers so decided to start with Optimum Finsl Finish Polish as it has the least cut. I also picked up some CG Hex Logic pads in Blue and Red. Could somebody please help me understand if either of these pads will work or should i get some other Hex Logic pad? I have access to some discounts on all CG products and I have read good things about their pads. Blue Pad http://www.chemicalguys.com/Chemical_Guys_BUFX_105HEX5_Hex_Logic_Light_Polis_p/bufx_105hex5.htm Red Pad http://www.chemicalguys.com/ProductDetails.asp?ProductCode=BUFX_107HEX5 They also have a Black pad http://www.chemicalguys.com/ProductDetails.asp?ProductCode=BUFX_106HEX5 Link to comment Share on other sites More sharing options...
Lowejackson Posted October 1, 2013 Share Posted October 1, 2013 As they all appear to be very mild pads, I would just choose the black one but there does not appear to be significant differences between them. Link to comment Share on other sites More sharing options...
Setec Astronomy Posted October 2, 2013 Share Posted October 2, 2013 I never really can figure out which finishing pad to use or why they even make 3 colors. IIRC the black is supposed to have a bit more cut than blue or red, maybe the reason I can never tell any difference between them is I'm usually working on hard paint. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.