Tempest45 Posted November 26, 2016 Share Posted November 26, 2016 I've seen a video where Yvan uses ONR in a bucket to clean Gloss coat applicators. Can the same process be used to clean Opti seal applicators? Thanks Link to comment Share on other sites More sharing options...
A&J Posted November 26, 2016 Share Posted November 26, 2016 It probably could be but I wouldn't bother with it. As long as its not dirty after use the opti-seal applicator is re-usable if you wash it afterwards or not. Link to comment Share on other sites More sharing options...
Tempest45 Posted November 28, 2016 Author Share Posted November 28, 2016 Thanks. There was dirt on the foam applicator where OS dissolved some gunk around door handles and other areas like that. Link to comment Share on other sites More sharing options...
A&J Posted November 28, 2016 Share Posted November 28, 2016 It didn't dissolve it...you just missed a spot while cleaning. I usually use a APC for cleaning applicators and polishing pads and Power clean works the best for this. Link to comment Share on other sites More sharing options...
The Guz Posted November 28, 2016 Share Posted November 28, 2016 Use an APC to clean them and rinse them out. You won't get all the product out but it will be good for the next time you use opti-seal. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.