Lowejackson Posted January 21, 2015 Share Posted January 21, 2015 Couple of quick questions about Optiglass. If applied below the minimum recommended temp i.e. in winter, can things be improved by extending the cure time or maybe using a hair dryer to put some heat into the glass Can Optiglass Clean & Protect be applied immediately after applying the coating Link to comment Share on other sites More sharing options...
Lowejackson Posted January 22, 2015 Author Share Posted January 22, 2015 One quick additional question. Can Optiglass C&P be used to buff off the freshly applied Optiglass rather than just buffing with a cloth? Link to comment Share on other sites More sharing options...
Lowejackson Posted February 4, 2015 Author Share Posted February 4, 2015 If no one knows the answer then maybe Optimum should send me a couple of bottles of Optiglass to experiment with different application methods Does everyone apply this product only in warm environments? Link to comment Share on other sites More sharing options...
Lowejackson Posted February 10, 2015 Author Share Posted February 10, 2015 No experimentalists played with Optiglass? Link to comment Share on other sites More sharing options...
Ron@Optimum Posted February 10, 2015 Share Posted February 10, 2015 Glass Pro cures very quickly (make sure you spray directly into pad, with no space between, and not onto the glass). You shouldn't need any help drying regardless of temp. Do not use Clean & Protect to level, use a dry microfiber within 1 minute of application. After 1 hour you can use Clean & Protect, if needed. Link to comment Share on other sites More sharing options...
Lowejackson Posted February 11, 2015 Author Share Posted February 11, 2015 Thanks Ron Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.